Common faults of image intensifiers

Do you know what are the common faults of image intensifiers? Let me introduce to you:
What are the common faults of image intensifiers:
Common faults like intensifier 1. High voltage power supply discharge:
①Phenomena: The main manifestations of the discharge of the high-voltage power supply are the phenomenon of ignition and the sound of squeaking at the high-voltage end of the power supply.
②Solution:
First: If the power supply is not broken, you can pull out the wires at the high-voltage end and clean them first, then apply high-voltage silicone grease to the high-voltage end of the power supply and reconnect the high-voltage wires. The discharge phenomenon of the power supply can be eliminated.
Second: When the high-voltage power supply is too seriously damaged by discharge. Only the power supply can be replaced.
Common faults of the image intensifier 2: discharge of the output screen of the intensifier:
①Phenomena: The main phenomenon is that the output screen has a flickering phenomenon. It means that the output screen of the intensifier will flicker when the intensifier is powered on but no rays are applied.
②Solution: The discharge of the output screen of the intensifier is mainly caused by the aging of the insulating glue of the output screen of the intensifier, so all the insulating glue at the output end should be removed, and then the sealing and baking process should be carried out again to solve the output problem. The phenomenon of screen discharge. Note: This requires the use of professional packaging equipment, do not do it without authorization, so as not to cause irreparable losses.
If you have other questions about common faults of image intensifiers, please contact us.Whatsapp:+86 18953679166. Email: service@newheek.com .

Author:Image Intensifier