Is the high-voltage ignition of the X-ray image intensifier a failure of the high-voltage power supply?

X-ray image intensifiers usually fail in two situations: one is that there is no image at all; the other is geometric shapes. This phenomenon is usually called image distortion. The main reason is the X-ray image intensifier itself. Conclusion: X-ray Distortion failure of image intensifier is a common failure. When the ground wire of the video signal is disconnected, it will also appear as distortion. The normal way to repair the distortion phenomenon is to first check whether the high-voltage power supply is normal, and then confirm the ground of the video signal line. Whether the line is good, and finally check whether the voltage of the high-voltage power supply that affects the high-voltage drive circuit of the X-ray intensifier is normal. If the vacuum part of the X-ray intensifier is distorted due to aging, it cannot be repaired. Therefore, the distortion fault needs Balance various factors to make the correct maintenance plan.

High-voltage ignition is caused by the reduction of high-voltage insulation strength and humidity. After analyzing the law of failure and summarizing the experience, it is ensured that the machine is kept dry in humid weather, preventing moisture and condensation. This situation has nothing to do with the high-voltage power supply.

See here, I believe you have a certain understanding of the X-ray image enhancer high pressure ignition repair method.This fault is not necessarily a fault of high voltage power supply.Please contact us if you have any questions or if you want to purchase alternative image enhancement equipment.

Author:肖恩