" /> " />

The NK16D digital camera converts the visible image from an image intensifier into a clean digital signal for display, storage and workflow integration. It is designed as the imaging front-end for C-arm digital imaging systems, fluoroscopy units and industrial X-ray inspection setups.
An imported high-sensitivity image chip and 2/3-inch black-and-white progressive scan sensor deliver stable low-light performance, while a wide operating humidity range allows reliable use in busy clinical and industrial environments. The NK16D is supplied by Newheek, a manufacturer of image intensifiers and X-ray imaging components, so camera and intensifier are matched at the source.
2/3″ High-Sensitivity Mono Sensor Imported high-sensitivity image chip, 2/3 inch, black-and-white progressive scan. Fine detail and clean edges across the intensifier output field.
≥69 dB Dynamic Range High dynamic range (≥69 dB) preserves both dense and low-attenuation areas in a single frame, reducing retakes.
Trigger & Sync I/O One external trigger signal input and one synchronous control signal output for tight integration with the generator and the imaging software.
Built for Real Environments Working humidity 20%–80%; storage from -25℃ to 60℃ at 20%–90% RH. Holds up to the conditions of daily clinical use.
Matched with Newheek Image Intensifiers Pairs with Newheek NK-23XZ (P3 / P3H), NK-31XZ and NK-33XZ image intensifiers — one supplier for the whole optical chain.
Technical Specifications
| Parameter | Specification |
| Model | NK16D |
| Sensor | 2/3″ mono progressive |
| Image chip | Imported high-sensitivity image chip, 2/3 inch, black & white progressive scan |
| Frame rate | 1–25 frames/s |
| Dynamic range | ≥69 dB |
| I/O interface | 1 × external trigger signal input; 1 × synchronous control signal output |
| Working humidity | 20%–80% |
| Storage conditions | -25°C to 60°C, 20%–90% RH |
| Typical system | C-arm digital imaging system; industrial X-ray image processing software |
| Compatible intensifiers | NK-23XZ (P3 / P3H), NK-31XZ, NK-33XZ |
Note: specifications shown are for reference. Confirm exact configuration with our sales team before ordering.
The NK16D works with Newheek’s C-arm digital imaging software and industrial X-ray image processing software. The software supports patient registration, case management and system settings; image pan when the zoomed view exceeds the window; predefined single-, dual- and quad-image output formats; and on-image labeling of parameters such as kV, mA and date.
1.What is the NK16D digital camera used for?
It digitizes the output of an X-ray image intensifier for C-arm, fluoroscopy and industrial X-ray imaging systems.
2.What sensor does the NK16D use?
A 2/3-inch black-and-white progressive scan sensor with an imported high-sensitivity image chip.
3.What frame rate can the NK16D achieve?
Adjustable from 1 to 25 frames per second.
4.Can the NK16D work with my existing image intensifier?
It is designed for Newheek NK-23XZ (P3 / P3H), NK-31XZ and NK-33XZ intensifiers. Contact us with your model for a compatibility check.
5.Does the NK16D support external triggering?
Yes. It provides one external trigger input and one synchronous control output.
6.Do you offer OEM supply?
Yes. Newheek supplies camera modules to imaging system integrators and distributors worldwide.
Need the NK16D datasheet, a compatibility check for your intensifier, or OEM pricing? Send your model list and quantity — our team will reply with specs and a quotation.
CTA:Get a Quote / Contact Newheek

Custom voltage & tube size available.
1 free sample for test before bulk order.
Lifetime technical support.
Tel: +86 19015366638
Whatsapp: +86 19015366638
Email: newheekcn@163.com
Company: Weifang Newheek Electronic Technology Co., Ltd.
ADD: E Building of Future Star Scientific Innovation Industrial Zone of No.957 Wolong East Street, Yulong Community, Xincheng Sub-District Office, Weifang Hi-tech Zone, Shandong Province, China