Image intensifier, what’s the matter with the bending of the image taken by feedback?

Image intensifier This situation is caused by magnetic field interference, geomagnetism. Geomagnetism exists everywhere, and we do not have a degaussing wire on our influence booster, so this happens. (Because this shield is expensive, it is usually not used)
If there is a degaussing coil on the old shadow increase in front of the customer, you can tell the customer to remove the degaussing coil on the shadow increase and install it on our shadow increase.
Specific operations:
Let the client put the image in the center and observe
Remove the large flange (input flange) of the original image intensifier and you will see a thin shield. Some are on the input flange, and some are on the input end of the shadow booster liner. After finding it, copy it down and put it on our booster.

Author:Image Intensifier