Replace the X-ray image intensifier on the lithotripter

Today, a customer asked about our X-ray image intensifier. The customer purchased it for the hospital to replace the image intensifier on the lithotripsy machine. I sent our product information to the customer. After the customer showed it to the hospital, the hospital said that it was still quite satisfied, and it was agreed that the next step of the negotiation would be held.
The X-ray image intensifier has two functions: one is to transform the X-ray image into a visible light image; the other is to increase the brightness by nearly ten thousand times. The advantages of using X-ray image intensifiers are: 1. Reduce the amount of X-ray exposure, so that patients and doctors are less exposed to X-ray radiation; 2. Increase the brightness so that doctors can observe images in bright rooms; 3. Because of the use of TV Observation images can be used for remote consultation and teaching. The internal structure of the X-ray image intensifier is basically the same regardless of the model, so the cause of the failure is also the same. The core of the X-ray image intensifier is the image intensifier tube. Now there are two widely used image intensifiers: variable field image intensifier and fixed vision industrial image intensifier tube.
At present, the 9-inch X-ray image intensifier of Huading Electronics NK-23XZ is an electronic device that converts X-ray images into visible light images. It is installed on the X-ray TV device for X-ray fluoroscopy and photography.
structure:
The X-ray image intensifier is composed of an X-ray image multiplier tube, a tube container, a dedicated high-voltage power supply built in the tube container, and a low-voltage power supply for driving the high-voltage power supply.
use:
The X-ray image intensifier has a nominal entrance field size of 230mm (9 inch), which is mainly used for small C-arms (orthopedics), gastrointestinal machines, industrial tire wheel inspections, etc.

Author:Lillian