What are the failures of X-ray image intensifiers?

Today, I will give you some knowledge. What are the faults of the X-ray image intensifier? Let me talk about the first one. If there is no image, there are three situations: 1. The inner tank of the X-ray image intensifier is damaged, 2. X-ray The high-voltage power supply of the image intensifier is poorly connected. This can be tested. If the power supply of the 3X-ray image intensifier is faulty, you have to find a replacement. This is also easy to say, if it is a long time, it will be difficult to find , We once received such a customer here. The high-voltage power supply is broken and there are not many places. We have one, which is a long time away. We found this place through other channels and we sold it to him at the market price. If he meets other manufacturers and distributors, he may ask for more money. Closer to home, second, the image is thin. There are two cases of this kind of situation. 1. The enhancement tube of the X-ray image intensifier is aging, and this one needs to be replaced. 2. The high pressure of the X-ray image intensifier is low. This can be specific Check it out. In the third case, the image is blurred, and there are three reasons for this. 1. The vacuum degree of the intensifier tube of the X-ray image intensifier is poor. 2. The focus voltage of the intensifier tube of the X-ray image intensifier is inappropriate. This has to be tested by professionals. 3. The output screen has a lot of dust. You have to wipe this by yourself. Be careful not to get water in, and then the image flickers. 1. The vacuum degree of the intensifier tube of the X-ray image intensifier is poor. 2. Enhancement Although there is high-voltage discharge interference, you have to find a dedicated engineer to check it. The above situations are basically the most common. Does everyone understand?

Please consult us if you have any questions!

Author:肖恩