Newheek specializes in producing X optical machine image intensifier, high voltage power supply,image intensifier TV system and so on.

HomeBlog ›Intensifier breakdown

Intensifier breakdown

Intensifier intensifier intensifier intensifier intensifier intensifier intensifier intensifier intensifier intensifier intensifier intensifier gets a narrow stripe on the screen. The intensifier turns on the aperture.
1.2 analysis and treatment
First of all, it is suspected that the fault is caused by poor contact. After careful observation, it is found that the machine cannot work normally when abnormal sounds are emitted in the collider during self-check at startup. The collider blade will automatically open and close during self-check at startup after disconnecting the collider shell for observation.
Intensifier breakdown
When the blade is opened to the maximum position, a limit switch is triggered, resulting in poor S contact. After adjusting the S switch contact, the machine will be tested, and the machine will resume normal troubleshooting.
Mr Newheek can provide not only a new intensifier, but also a repair intensifier.
Come and contact us!

Author:Glinda


(+86) 17616362243
service@newheek.com