newheek x ray high-voltage power supply production replaces TH7195 high-voltage power supply

A * equipment company called newheek to report that the x ray high-voltage power supply TH7195 on the Thales image intensifier has been damaged. Ask if our company has a x ray high-voltage power supply with the same performance that can be completely replaced? Tell customers that the newheek TH-30C3 x ray low-voltage power supply is specially made for Thales TH7195 high-voltage power supply. Its appearance, installation size, input and output characteristics are exactly the same as the original power supply, and it can be replaced with confidence. It has stability and reliability. Unique, it will never be inferior to Thales’s originalx ray high-voltage power supply.

About the function introduction of newheekTH-30C3 high voltage power supply and the precautions for maintenance and replacement are as follows:

Function introduction

(1) The HV terminal is connected to the anode of the image intensifier

(2) G4 is connected to the pump electrode of the image intensifier.

(3) G3 is connected to the field of view control electrode of the image intensifier, corresponding to three modes: 9 inch, 6 inch and 4.5 inch;

G3 is used to adjust the field of view, that is, the size of the image intensifier image.

(4) G2 is connected to the second focusing electrode of the image intensifier, and there are also three modes: 9 inch, 6 inch and 4.5 inch;

G2 is used to adjust the sharpness of the image center of the image intensifier.

(5) G1 is connected to the first focusing electrode of the image intensifier, and there are also three modes: 9 inch, 6 inch and 4.5 inch;

G1 is used to adjust the sharpness of the image edge of the image intensifier

Speaking of this, I believe that everyone should know the parameters of TH7195 high-voltage power supply, maintenance and installation matters, if you encounter any problems later, Please feel free to contact us.

Author:肖恩