Newheek high-voltage power supply production replaces French Thales high-voltage power supply

A customer told us that the high-voltage power supply on his Thales image intensifier was damaged. Ask if our company has a high-voltage power supply with the same performance that can be completely replaced? Tell customers that the newheek high-voltage power supply is specially made for Thales TH7195 high-voltage power supply. Its appearance, installation size, input and output characteristics are exactly the same as the original power supply, and it can be replaced with confidence. It has stability and reliability. Unique, it will never be inferior to Thales’s original high-voltage power supply.
About the function introduction of newheekhigh-voltage power supply and the precautions for maintenance and replacement are as follows:
1. Function introduction
(1) The HV terminal is connected to the anode of the image intensifier (the HV terminal is the G5 terminal).
(2) G4 is connected to the pump electrode of the image intensifier.
(3) G3 is connected to the field of view control electrode of the image intensifier, corresponding to three modes: 9 inch, 6 inch and 4.5 inch;
G3 is used to adjust the field of view, that is, the size of the image intensifier image.
(4) G2 is connected to the second focusing electrode of the image intensifier, and there are also three modes: 9 inch, 6 inch and 4.5 inch;
G2 is used to adjust the sharpness of the image center of the image intensifier.
(5) G1 is connected to the first focusing electrode of the image intensifier, and there are also three modes: 9 inch, 6 inch and 4.5 inch;
G1 is used to adjust the sharpness of the image edge of the image intensifier
Speaking of this, I believe that everyone should know the parameters of high-voltage power supply, maintenance and installation matters, if you encounter any problems later, please detailed consultation!

Author:Lillian